When I got my hands on a used NanoVNA H4 I couldn't resist looking inside to see if it was using shielding for the RF components. Turned out it did so I bought the right one. But one thing I noticed was the component silkscreen for a micro SD-card slot without the slot it self and because it still contained the original software which didn't mention anything about saving images to SD cards, I didn't do anything with it.  

Until now . . . (continue reading)

Got my QCXmini kit from QRPLabs and finished it. So I added a complete building report (incl designs for the tilt-feet) on this page. 

A few owners of the new NanoVNA H4 have requested me if I could re-design the PCB so male SMA edge connectors can be used to directly connect the adapter PCB to the NanoVNA H4.  For a while I holded it off, but recently I got my hands on a used NanoVNA H4 which I'm very happy with because of the bigger screen (yes my eyes aren't getting better). I started to use the H4 and wanted a dedicated adapter for it. So I measured  my NanoVNA H4 and it has a distance of  39.5mm and comments from other OM's indicate that it's quite constant +- 0.1mm. 

So I made a copy of the original design and changed the board layout to fit our needs. 

continue reading